OUTPUT |
Output Volt Amp Capacity (VA) | 1500 | Output kVA Capacity (kVA) | 1.5 | Output Watt Capacity (Watts) | 900 | Nominal Output Voltage(s) Supported | 220V; 230V; 240V | Nominal Voltage Details | 230v inverter nominal output voltage | Frequency Compatibility | 50 / 60 Hz | Output Voltage Regulation (Line Mode) | -18%, +8% | Output Voltage Regulation (Battery Mode) | +/- 5% | Output Receptacles | (8) C13 | Included Output Power Cables | Includes 2 C13 to C14 output power cables. | Hot-Swap PDU options | PDUBHV10 (2U / 8 C13 outlets) | Output AC Waveform (AC Mode) | Sine wave | Output AC Waveform (Battery Mode) | PWM sine wave |
|
INPUT |
Rated input current (Maximum Load) | 4.4A | Nominal Input Voltage(s) Supported | 230V AC | UPS Input Connection Type | C14 inlet | UPS Input Connection Description | Attached 15cm line cord with C14 inlet. C14 inlet accepts user-supplied AC power cord with country specific plug. | Input Circuit Breakers | 5.5A | UPS Input Cord Length (ft.) | 0.5 | UPS Input Cord Length (m) | 0.2 | Input Phase | Single-Phase |
|
BATTERY |
Full Load Runtime (min.) | 4.5 min. (900w) | Half Load Runtime (min.) | 12 min. (450w) | DC System Voltage (VDC) | 24 | Battery Recharge Rate (Included Batteries) | Less than 4.5 hours from 10% to 90% | Expandable Runtime | No |
|
VOLTAGE REGULATION |
Voltage Regulation Description | Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 144 to 282 | Overvoltage Correction | Input voltages between 245 and 282 are reduced by 12% | Undervoltage Correction | Input voltages between 177 and 199 are boosted by 14% | Severe Undervoltage Correction | Input voltages between 144 and 176 are boosted by 30% |
|
USER INTERFACE, ALERTS & CONTROLS |
Front Panel LCD Display | Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and replace battery status; LCD screen rotates for rack/tower viewing | Switches | 2 Switches control off/on power status and alarm-cancel/self-test operation | Alarm Cancel Operation | Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | Audible Alarm | Audible alarm indicates power-failure, low-battery and overload status; alarm can be disabled using PowerAlert software | LED Indicators | Front panel LCD display |
|
SURGE / NOISE SUPPRESSION |
UPS AC Suppression Joule Rating | 890 | UPS AC Suppression Response Time | Instantaneous | UPS Dataline Suppression | 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet; Coax jacks (1 set) | EMI / RFI AC Noise Suppression | Yes |
|
PHYSICAL |
Included Mounting Accessory Description | Pair of mounting ears enable tower and 2-4 post rackmount installation | Installation Form Factors Supported with Included Accessories | Tower | Primary Form Factor | Rackmount | UPS Power Module Dimensions (hwd, cm) | 8.9 x 43.8 x 26.7 | Rack Height (U Spaces) | 2 | Maximum Device Depth (cm) | 26.7 | UPS Power Module Weight (kg) | 13.3 | UPS Shipping Dimensions (hwd / cm) | 19 x 57.2 x 38.7 | Shipping Weight (kg) | 15.2 | UPS Housing Material | ABS |
|
ENVIRONMENTAL |
Operating Temperature Range | +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | Storage Temperature Range | +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | Relative Humidity | 0 to 95%, non-condensing | AC Mode BTU / Hr. (Full Load) | 127.5 | Battery Mode BTU / Hr. (Full Load) | 540 | AC Mode Efficiency Rating (100% Load) | 96% |
|
COMMUNICATIONS |
Communications Interface | USB (HID enabled); DB9 Serial | Network Monitoring Port Description | Supports detailed monitoring of UPS and site power conditions | PowerAlert Software | Free download from www.tripplite.com | Communications Cable | USB and DB9 Serial cabling included | WatchDog Compatibility | Supports Watchdog application, OS and hard-reboot restart options for remote applications |
|
LINE / BATTERY TRANSFER |
Transfer Time | 2-4 milliseconds | Low Voltage Transfer to Battery Power (Setpoint) | 144 | High Voltage Transfer to Battery Power (Setpoint) | 282 |
|
SPECIAL FEATURES |
Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported | Green Energy-Saving Features | Greater than 95% efficiency – GREEN UPS |
|
CERTIFICATIONS |
UPS Certifications | CE; Tested to GOST (Russia); Tested to SASO (Saudi Arabia); Meets FCC Part 15 Category A (EMI) | UPS Certification Details | CE IEC 62040-1-1, 62040-1-2 |
|
WARRANTY |
Product Warranty Period (International) | 2-year limited warranty | Product Warranty Period (Mexico) | 2-year limited warranty | Product Warranty Period (Puerto Rico) | 2-year limited warranty |
|