OUTPUT
|
| Output Volt Amp Capacity (VA) |
1000 |
| Output kVA Capacity (kVA) |
1 |
| Output Watt Capacity (Watts) |
700 |
| Power Factor |
0.7 |
| Crest Factor |
3:1 |
| Nominal Output Voltage(s) Supported |
220V; 230V; 240V |
| Nominal Voltage Details |
230V default |
| Frequency Compatibility |
50 / 60 Hz |
| Frequency Compatibility Details |
Output frequency matches input nominal on startup, defaults to 50 Hz on cold-start |
| Output Voltage Regulation (Line Mode) |
+/- 2% |
| Output Voltage Regulation (Economy Line Mode) |
+/- 10% |
| Output Voltage Regulation (Battery Mode) |
+/- 2% |
| Output Receptacles |
(4) C13 |
| Included Output Power Cables |
Includes 2 C13 to C14 power cables |
| Output AC Waveform (AC Mode) |
Sine wave |
| Output AC Waveform (Battery Mode) |
Pure Sine wave |
|
INPUT
|
| Rated input current (Maximum Load) |
3.7A (220V),3.5A (230V),3.4A (240V) |
| Nominal Input Voltage(s) Supported |
220V AC; 230V AC; 240V AC |
| UPS Input Connection Type |
C14 inlet |
| UPS Input Connection Description |
IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles |
| Input Circuit Breakers |
8A |
| Input Phase |
Single-Phase |
|
BATTERY
|
| Full Load Runtime (min.) |
5 min. (700w) |
| Half Load Runtime (min.) |
14 min. (350w) |
| DC System Voltage (VDC) |
36 |
| Battery Recharge Rate (Included Batteries) |
Less than 4 hours from 10% to 90% (typical, full load discharge) |
| Battery Replacement Description |
Hot-swappable, user replaceable batteries |
| Expandable Runtime |
No |
|
VOLTAGE REGULATION
|
| Voltage Regulation Description |
Online, double-conversion power conditioning |
| Overvoltage Correction |
2% output voltage regulation during overvoltages to 280 |
| Undervoltage Correction |
2% output voltage regulation during undervoltages to 175 |
| Severe Undervoltage Correction |
2% output voltage regulation during undervoltages to 80 (under 50% load only) |
|
USER INTERFACE, ALERTS & CONTROLS
|
| Switches |
2 Switches control off/on power status and alarm-cancel/self-test operation |
| Alarm Cancel Operation |
Power-fail alarm can be silenced using alarm-cancel switch |
| Audible Alarm |
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions |
| LED Indicators |
14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information – includes 4-LED meter display for load and battery charge level |
|
SURGE / NOISE SUPPRESSION
|
| UPS AC Suppression Joule Rating |
570 |
| UPS AC Suppression Response Time |
Instantaneous |
| EMI / RFI AC Noise Suppression |
Yes |
|
PHYSICAL
|
| Primary Form Factor |
Tower |
| UPS Power Module Dimensions (hwd, cm) |
24.1 x 14 x 36.6 |
| UPS Power Module Weight (kg) |
14 |
| UPS Shipping Dimensions (hwd / cm) |
32.5 x 24.1 x 50.5 |
| Shipping Weight (kg) |
17 |
| Cooling Method |
Fan |
| UPS Housing Material |
Steel |
|
ENVIRONMENTAL
|
| Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius |
| Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
| Relative Humidity |
0 to 95%, non-condensing |
| AC Mode BTU / Hr. (Full Load) |
264.4 |
| AC Economy Mode BTU / Hr. (Full Load) |
151.9 |
| Battery Mode BTU / Hr. (Full Load) |
387.4 |
| AC Mode Efficiency Rating (100% Load) |
90% |
| AC Economy Mode Efficiency Rating (100% Load) |
94% |
| Audible Noise |
< 45 dB at front side 1m |
|
COMMUNICATIONS
|
| Communications Interface |
DB9 Serial |
| Network Monitoring Port Description |
Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 communications |
| PowerAlert Software |
Included |
| Communications Cable |
DB9 cabling included |
|
LINE / BATTERY TRANSFER
|
| Transfer Time |
No transfer time (0 ms.) in online, double-conversion mode |
| Low Voltage Transfer to Battery Power (Setpoint) |
175V (100% load), 80V ( <50% load) |
| High Voltage Transfer to Battery Power (Setpoint) |
280 |
|
SPECIAL FEATURES
|
| Cold Start (Startup in Battery Mode During a Power Failure) |
Cold-start operation supported |
| High Availability UPS Features |
Automatic inverter bypass |
| Green Energy-Saving Features |
High efficiency economy mode operation; Schedulable daily hours of economy mode operation |
|
CERTIFICATIONS
|
| UPS Certifications |
CE |
| UPS Certification Details |
CE EN62040-1-1, EN62040-2 Class A |
|
WARRANTY
|
| Product Warranty Period (Worldwide) |
2-year limited warranty |
|
