Get Quotation
Lets Talk Now

SUINT2000XL

Get Quotation

SUINT2000XL Suppliers in Dubai

We give the best SUINT2000XL price in Dubai. More than this we are the top SUINT2000XL suppliers in Dubai. In addition to this we give the best tripp lite product support services in Dubai. More than this we are the top tripp lite dealers and distributors in Dubai.

Features

  • True on-line, double conversion UPS provides pure sine wave AC output at all times
  • Maintains continuous operation with zero transfer time through blackouts, voltage fluctuations and surges
  • Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
  • Corrects brownout and overvoltages from 175-280V at full load. Input voltage range extends to 80-280V at 50% load or less
  • 2000VA/1400W power capacity with 8 C13 outlets
  • IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
  • Standard internal battery set provides 14 min. runtime at half load and 5 min. runtime at full load
  • Intelligent battery management system extends battery life
  • Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
  • Expandable runtime with optional external battery packs
  • DB9 serial port for network interface; SNMP compatible
  • Slot for optional SNMP/web card(part# SNMPWEBCARD)
  • PowerAlert unattended shutdown software and network cable included
  • Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
  • Diagnostic LEDs
  • Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
  • 3 C13-to-C14 power cables included.

Specifications

OUTPUT
Output Volt Amp Capacity (VA) 2000
Output kVA Capacity (kVA) 2
Output Watt Capacity (Watts) 1400
Output kW Capacity (kW) 1.4
Power Factor 0.7
Crest Factor 3:1
Nominal Output Voltage(s) Supported 220V; 230V; 240V
Nominal Voltage Details 230V default
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Output frequency matches input nominal on startup, defaults to 50 Hz on cold-start
Output Voltage Regulation (Line Mode) +/- 2%
Output Voltage Regulation (Economy Line Mode) +/- 10%
Output Voltage Regulation (Battery Mode) +/- 2%
Output Receptacles (8) C13
Included Output Power Cables Includes 3 C13 to C14 output power cables
Hot-Swap PDU options PDUBHV20 (2U / 6 C13, 2 C19 outlets)
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 7.4A (220V), 7.1A (230V), 6.8 (240V)
Nominal Input Voltage(s) Supported 220V AC; 230V AC; 240V AC
UPS Input Connection Type C20 inlet
UPS Input Connection Description IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
Input Circuit Breakers 20A
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 5 min. (1400w)
Half Load Runtime (min.) 14 min. (700w)
Expandable Battery Runtime Extended runtime supported via optional external battery packs
External Battery Pack Compatibility BP72V15-2U(limit 1); BP72V28RT-3U(multi-pack compatible)
DC System Voltage (VDC) 72
Battery Recharge Rate (Included Batteries) Less than 4 hours from 10% to 90% (typical, full load discharge)
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime Yes
VOLTAGE REGULATION
Voltage Regulation Description Online, double-conversion power conditioning
Overvoltage Correction 2% output voltage regulation during overvoltages to 280
Undervoltage Correction 2% output voltage regulation during undervoltages to 175
Severe Undervoltage Correction 2% output voltage regulation during undervoltages to 80 (under 50% load only)
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information – includes 4-LED meter display for load and battery charge level
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 570
UPS AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Primary Form Factor Tower
UPS Power Module Dimensions (hwd, cm) 37.3 x 14 x 42.4
UPS Power Module Weight (kg) 30.5
UPS Shipping Dimensions (hwd / cm) 49.3 x 24.9 x 60.5
Shipping Weight (kg) 33.5
Cooling Method Fan
UPS Housing Material Steel
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 528.9
AC Economy Mode BTU / Hr. (Full Load) 303.8
Battery Mode BTU / Hr. (Full Load) 774.9
AC Mode Efficiency Rating (100% Load) 90%
AC Economy Mode Efficiency Rating (100% Load) 94%
Audible Noise < 45 dB at front side 1m
COMMUNICATIONS
Communications Interface DB9 Serial; Slot for SNMP/Web interface
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 communications
PowerAlert Software Included
Communications Cable DB9 cabling included
LINE / BATTERY TRANSFER
Transfer Time No transfer time (0 ms.) in online, double-conversion mode
Low Voltage Transfer to Battery Power (Setpoint) 175V (100% load), 80V ( <50% load)
High Voltage Transfer to Battery Power (Setpoint) 280
SPECIAL FEATURES
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features Automatic inverter bypass
CERTIFICATIONS
UPS Certifications CE
UPS Certification Details CE EN62040-1-1, EN62040-2 Class A
WARRANTY
Product Warranty Period (Worldwide) 2-year limited warranty

Related Products

Related products