OUTPUT
|
Output Volt Amp Capacity (VA) |
550 |
Output Watt Capacity (Watts) |
300 |
Nominal Output Voltage(s) Supported |
230V |
Nominal Voltage Details |
230V nominal inverter output voltage |
Frequency Compatibility |
50 / 60 Hz |
Output Voltage Regulation (Line Mode) |
+8%, -21% |
Output Voltage Regulation (Battery Mode) |
+/- 5% |
Output Receptacles |
(8) CEE7/7 |
Output AC Waveform (AC Mode) |
Sine wave |
Output AC Waveform (Battery Mode) |
PWM sine wave |
|
INPUT
|
Rated input current (Maximum Load) |
10A |
Nominal Input Voltage(s) Supported |
230V AC |
UPS Input Connection Type |
CEE 7/7 Schuko |
UPS Input Cord Length (ft.) |
6 |
UPS Input Cord Length (m) |
1.8 |
Input Phase |
Single-Phase |
|
BATTERY
|
Full Load Runtime (min.) |
3 min. (300w) |
Half Load Runtime (min.) |
9.7 min. (150w) |
DC System Voltage (VDC) |
12 |
Battery Recharge Rate (Included Batteries) |
Less than 15 hours from 10% to 90% |
Battery Access |
Provides the best access door for battery |
Battery Replacement Description |
Hot-swappable, user replaceable batteries |
Expandable Runtime |
No |
|
VOLTAGE REGULATION
|
Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 159 to 282VAC |
Overvoltage Correction |
Input voltages between 245 and 282 are reduced by 12% |
Undervoltage Correction |
Input voltages between 159 and 205 are boosted by 14% |
|
USER INTERFACE, ALERTS & CONTROLS
|
Switches |
Combination switch controls on/off power status and self-test operation |
Audible Alarm |
Audible alarm indicates power-failure and overload status |
LED Indicators |
2 LEDs indicate power status and overload/check battery status |
|
SURGE / NOISE SUPPRESSION
|
UPS AC Suppression Joule Rating |
320 |
UPS AC Suppression Response Time |
Instantaneous |
UPS Dataline Suppression |
1 line TEL/DSL (1 in / 1 out) |
EMI / RFI AC Noise Suppression |
Yes |
|
PHYSICAL
|
Installation Form Factors Supported with Included Accessories |
Ultra-compact desktop |
Primary Form Factor |
Desktop |
UPS Power Module Dimensions (hwd, cm) |
12 x 27.9 x 15.2 |
UPS Power Module Weight (kg) |
5.2 |
UPS Shipping Dimensions (hwd / cm) |
18.5 x 36.1 x 24.2 |
Shipping Weight (kg) |
5.6 |
UPS Housing Material |
ABS |
|
ENVIRONMENTAL
|
Operating Temperature Range |
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius. |
Storage Temperature Range |
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius. |
Relative Humidity |
0 to 95%, non-condensing |
AC Mode BTU / Hr. (Full Load) |
16 |
AC Mode Efficiency Rating (100% Load) |
99% |
|
COMMUNICATIONS
|
Communications Interface |
USB |
PowerAlert Software |
Free download from www.tripplite.com |
Communications Cable |
USB interface cable included |
WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications |
Network UPS Tools Compatibility |
NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite |
|
LINE / BATTERY TRANSFER
|
Transfer Time |
5 milliseconds (line to battery mode) / 1 millisecond (battery to line mode) |
Low Voltage Transfer to Battery Power (Setpoint) |
159 |
High Voltage Transfer to Battery Power (Setpoint) |
282 |
|
SPECIAL FEATURES
|
Cold Start (Startup in Battery Mode During a Power Failure) |
Cold-start operation supported |
High Availability UPS Features |
Hot swappable batteries |
Green Energy-Saving Features |
Greater than 95% efficiency – GREEN UPS |
|
CERTIFICATIONS
|
UPS Certifications |
CE; Meets FCC Part 15 Category B (EMI); ROHS (Restriction of Hazardous Substances) |
UPS Certification Details |
IEC 62040, IEC 60950, EN 62040, GS MARK |
|
WARRANTY
|
Product Warranty Period (International) |
2-year limited warranty |
|