Sophos CS210-48FP Multi-Gigabit PoE Switch

Description

Sophos CS210-48FP Switch

Cloud-managed 48-port multi-gigabit PoE switch with a high mix of 1G and 2.5G ports, four SFP+ uplinks, and a 740 W power budget. 1U rackmount design built for high-density modern access-layer performance within the Sophos ecosystem.

Connectivity and Power

Thirty-two Gigabit and sixteen multi-gigabit (up to 2.5G) copper PoE ports serve and power end devices. Four SFP+ ports support 1G or 10G uplinks to core switches, firewalls, or fiber infrastructure.

Performance and Features

224 Gbps switching capacity, 32K MAC table, and support for up to 256 VLANs deliver solid Layer 2 performance while supplying reliable high-density mixed-speed and PoE power.

Management

Sophos Central provides zero-touch or guided onboarding, configuration, monitoring, and firmware management in the same console used for Sophos security products.

Deployment Flexibility

Standard 1U rackmount form factor with included mounting hardware. Internal high-capacity power supply for clean installation.

Why Choose CS210-48FP?

A high-density multi-gigabit PoE switch for environments that need maximum port count with a combination of standard Gigabit and higher 2.5G speeds plus substantial PoE capacity. Ideal flagship option in the Sophos Switch 200 Series.

Configuration Guide

Step 1 – Physical Installation

Install the switch in a standard 19-inch rack using the included ears and screws. Ensure proper airflow, especially under full PoE load.

Step 2 – Power Connection

Connect the internal power supply to a suitable power source and power on the switch.

Step 3 – Network Connection

Connect uplink cables to the SFP+ ports. Assign multi-gigabit ports to high-performance devices and Gigabit ports to standard endpoints.

Step 4 – Sophos Central Onboarding

Register or claim the switch in Sophos Central. Follow the guided setup for network settings and management.

Step 5 – VLAN and Port Configuration

Create VLANs, assign ports, and configure any required access control or QoS policies via Central.

Step 6 – PoE Settings

Monitor the high PoE power budget carefully, enable or disable PoE per port, and set priority if needed.

Step 7 – Uplink and Redundancy

Configure SFP+ uplinks, link aggregation if needed, and spanning-tree settings.

Step 8 – Security Settings

Apply 802.1X, MAC authentication, ACLs, and other security features as required.

Step 9 – Monitoring and Firmware

Enable monitoring, set up alerts (including PoE status and budget), and schedule firmware updates through Sophos Central.

Step 10 – Testing

Verify multi-gigabit and Gigabit connectivity, PoE power delivery under load, VLAN isolation, uplink performance, and management status.

CS210-48FP Mounting Options

Rack Mount

Standard 1U installation in a 19-inch rack. Mounting ears and screws are included.

Ensure adequate ventilation and follow standard rack installation practices for cable management and airflow, especially under full 740 W PoE load.

Installation Best Practices

Manufacturer Guidelines

Operate within 0–40 °C. Use the internal power supply. Provide adequate rack ventilation. Do not exceed the 740 W PoE budget. Note that 10M full/half and 100M half duplex are not supported on multi-gig ports.

General Best Practices

Use quality Cat5e or better cabling (Cat6 recommended for consistent 2.5G). Plan VLAN structure and detailed PoE power allocation before deployment. Keep firmware current via Sophos Central. Label ports clearly. Maintain proper airflow in the rack. Calculate total PoE draw carefully.

Benefits for IT Teams

Centralized management reduces on-site configuration effort. High mix of 1G/2.5G ports provides maximum access-layer flexibility. High PoE budget powers large numbers of modern devices. Consistent Sophos ecosystem visibility for security and networking teams.

Main Features

High Mix of 1G and 2.5G PoE Ports

Thirty-two Gigabit and sixteen multi-gigabit (2.5G) PoE ports.

Benefit: Maximum flexibility for both standard and high-performance devices at high density.

740 W PoE Budget

Supports 802.3af and 802.3at with a high 740 W budget.

Benefit: Power large numbers of access points, phones, or cameras.

4× SFP+ Uplinks

Four 1G/10G SFP+ slots.

Benefit: Flexible high-speed uplinks to core or distribution layers.

Sophos Central Management

Cloud management through Sophos Central.

Benefit: Unified visibility and control with firewalls and access points.

1U Rackmount Design

Standard rack form factor with included mounting hardware.

Benefit: Easy integration into existing network closets.

200 Series High-Density Multi-Gig

Highest-density multi-gigabit model in the 200 Series.

Benefit: Maximum port count with mixed speeds and high PoE capacity.

Product Deployment Scenarios

1. Large Modern Offices with Wi-Fi 6/6E

Power and connect large numbers of high-performance Sophos AP6 access points on multi-gigabit ports while serving standard devices on Gigabit ports.

2. Campus and High-Density Access Layers

High-density mixed-speed PoE switch for large floors or buildings.

3. Education and Large Branch Sites

Centralized management of high-density multi-gig infrastructure via Sophos Central.

4. Mixed High-Performance and Standard Endpoints

Assign multi-gigabit ports to demanding workstations or APs and Gigabit ports to standard devices.

5. Future-Proof High-Density Deployments

Deploy multi-gigabit ready infrastructure at scale alongside standard Gigabit ports.

6. Sophos Ecosystem Deployments

Pairs with Sophos firewalls and AP6 access points under a single Central console.

Who Should Buy CS210-48FP?

Large modern offices, campus sites, high-density Wi-Fi 6/6E deployments, and any network that needs maximum multi-gigabit and Gigabit port density with high PoE capacity. Ideal for organizations already using or planning to use Sophos Central. Choose smaller 200 Series or 100 Series models if lower density is sufficient.

CS210-48FP Product Comparison

Analysis

Choose the CS210-48FP when you need the highest density of mixed Gigabit and multi-gigabit (2.5G) ports with high PoE capacity. Use CS110-48FP for pure Gigabit high-density needs, or CS210-24FP for a smaller multi-gigabit footprint.

Frequently Asked Questions

What is the Sophos CS210-48FP?

A 48-port multi-gigabit PoE managed switch with thirty-two 1G and sixteen 2.5G ports, four 1G/10G SFP+ uplinks, 740 W PoE budget, 1U rackmount design, and Sophos Central management.

Does the CS210-48FP support PoE?

Yes. It supports IEEE 802.3af and 802.3at with a high total power budget of 740 W.

What speeds do the copper ports support?

Thirty-two ports support up to 1 Gbps. Sixteen ports support 100 Mbps, 1 Gbps, and 2.5 Gbps. Note that 10 Mbps full/half and 100 Mbps half duplex are not supported on the multi-gig ports.

How is it managed?

Primarily through Sophos Central for cloud-based configuration and monitoring.

What is the switching capacity?

224 Gbps.

How many SFP+ ports does it have?

Four 1G/10G SFP+ uplink ports.

Is it rack-mountable?

Yes. It is a standard 1U rackmount switch with mounting ears and screws included.

What is the difference versus CS110-48FP?

CS210-48FP adds sixteen multi-gigabit (2.5G) ports and belongs to the 200 Series, while CS110-48FP is pure Gigabit from the 100 Series (both share a similar high PoE budget).

Is it suitable for large Wi-Fi 6/6E deployments?

Yes. The high number of multi-gigabit ports and 740 W PoE budget make it well suited for dense high-performance access point deployments.

Does it support 10G uplinks?

Yes. The four SFP+ ports support both 1G and 10G modules.