Description
RG-AP630 (IDA2) Outdoor Wireless Access Point Series
RG-AP630 (IDA2) Outdoor Wireless Access Point Series. Ruijie RG-AP630 (IDA2) is Ruijie’s top-class 802.11ac Wave 2 wireless access points for next-gen high-speed wireless network applications.The RG-AP630(IDA2) supports 2.533Gbps access rate. The RG-AP630(IDA2) takes full care of security, RF control, mobile access, QoS, seamless roaming and other Wi-Fi aspects. Teaming up with Ruijie RG-WS Wireless Controller Series, the APs offer Wi-Fi user data forwarding, advanced security and access control with ease.The industrial-class AP enclosure (IP67 rated) can withstand extreme outdoor conditions and hence simplify device installation and maintenance. The RG-AP630(IDA2) is built-in with directional antenna An extensive collection of external antennas is also available to overcome various deployment challenges. The AP support automatic switching between the external and internal antennas.
Feature highlights of RG-AP630 Outdoor AP Series:
• 802.11ac/802.11ac wave2 Superior Wireless Performance
• Built-in Smart Antenna (optional External Antenna) & Lightning Arrester
• Outstanding Environmental Adaptability (IP68, -40-55°C)
RG-AP630 (IDA2) Outdoor Wireless Access Point Series Dubai
| Model | RG-AP630(IDA2) | |
| Target Deployments | For big campus, wireless city, harbour, storage room, mine | |
Basic Specifications | Radio | Concurrent dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac Wave2 | |
| Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz | |
802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz | ||
(vary depending on countries) | ||
| Antenna | Built-in Directional Smart Antenna (support external/internal antenna switching) | |
| Antenna Loba Orientation | Internal Directional: Horizontal 60 degrees,Vertical 30 degrees | |
| Antenna Gain | 10dBi | |
| Max Throughput | Build-in antenna model: [email protected] | |
1733Mbps@5G | ||
2.533Gbps per AP; | ||
External antenna model: | ||
1733Mbps@5G | ||
2.133Gbps per AP | ||
| Spatial Streams | 4 | |
| Modulation | OFDM: BPSK@6/9Mbps | |
QPSK@12/18Mbps | ||
16-QAM@24Mbps | ||
64-QAM@48/54Mbps | ||
DSSS: DBPSK@1Mbps | ||
DQPSK@2Mbps | ||
[email protected]/11Mbps | ||
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM | ||
| Receiver Sensitivity | 11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps) | |
11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), – 77dBm(54Mbps) | ||
11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15 | ||
11ac HT20: -90dBm (MCS0) , -63dBm (MCS9) | ||
11ac HT40: -85dBm(MCS0) , -60dBm (MCS9) | ||
11ac HT80: -82dBm(MCS0) , -58dBm (MCS9) | ||
| Maximum Transmit Power | 27dBm | |
Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations. | ||
| Adjustable Power | 1dBm | |
| IP Rating | IP67 | |
Ports | Service Port | One 10/100/1000Base-T Port（ETH1/PoE IN)；One 10/100/1000Base-T Port(ETH2)； |
One 1000M SFP Port(Combo Port) | ||
| Management Port | 1 Console Port(RJ45) | |
Power | Power Supply | PoE+ (802.3at) |
| Power Consumption | <25W | |
| WLAN | Maximum clients per AP | Up to 512 |
| SSID capacity | Up to 16 per radio | |
Up to 32 per AP | ||
| SSID hiding | Support | |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support | |
| Remote Intelligent Perception Technology (RIPT) | Support | |
| X-speed | Support | |
| Intelligent load balancing based on the number of users or traffic | Support | |
| STA control | SSID/radio-based | |
| Bandwidth control | STA/SSID/AP-based speed control | |
| Preference for 5GHz (band select) | Support | |
| Wireless position tracking | Support | |
| Dynamic Frequency Selection(DFS) | Future Release Support | |
Security | PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) | |
| QR code authentication | Support | |
| SMS authentication | Support | |
| PEAP authentication | Support | |
| Data frame filtering | Whitelist, static/dynamic blacklist | |
| User isolation | Support | |
| Rogue AP detection and countermeasure | Support | |
| Dynamic ACL assignment | Support | |
| WAPI | Support | |
| RADIUS | Support | |
| CPU Protection Policy (CPP) | Support | |
| Network Foundation Protection Policy (NFPP) | Support | |
| Wireless Intrusion Detection System(WIDS) | Support | |
| Wireless Intrusion Prevention System (WIPS) | Support | |
| Routing | IPv4 address | Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel | Support | |
| ICMPv6 | Support | |
| IPv6 address | Manual or automatic configuration | |
| Multicast | Support | |
| Management and Maintenance | Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and web management |
| Visualized wireless heat map analysis | Support | |
(need to integrate with SNC) | ||
| Real-time spectrum analysis | Support | |
(need to integrate with SNC) | ||
| Fault detection and alarm | Support | |
| Cloud AC management | Support | |
| Statistics and logs | Support | |
| FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. | |
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. | ||
| External Characteristics | Lock | Support |
| LED Indicators | Power status and WDS signal strength | |
| Relevant Standard | Wi-Fi Alliance Certification | Support |
| Safety Standard | GB4943, , EN/IEC 60950-1, EN/IEC 60950-22 | |
| EMC Standard | GB9254-2008, EN301 489, EN55022 | |
| Health Standard | EN 50385, | |
| Radio Standard | FCC Part15,EN300328, EN301893 | |
| Vibration Standard | GB/T 2423 | |
Specifications | Dimensions (W x D x H) (mm) | 276 × 246 × 90 |
| Weight | <2.5kg | |
| Work Environment | Temperature | Operating Temperature: -40°C to 65°C (heater module will be enabled at -15°C) |
Storage Temperature: -40°C to 85°C | ||
| Humidity | Operating Humidity: 0% to 100% (non-condensing) | |
Storage Humidity: 0% to 100% (non-condensing) | ||
| Installation Mode | Wall/pole-mount installation | |
