“4TB- ST4000VX000” has been added to your basket.
View basketDescription
SMARTINT2200VS
We are the top SMARTINT2200VS dealers and distributors in Dubai. Also we give the best tripp lite SMARTINT2200VS price in Dubai. In addition to this we are the top tripp lite SMARTINT2200VS suppliers in Dubai. More than this we are the top
- SMARTINT2200VS line interactive UPS offers protection from blackouts, brownouts, overvoltages and surges
- 2200VA / 1600 watt capacity
- Internal batteries support a half load of 1100VA for 19 minutes and a full load of 2200VA for 7 minutes
- Intelligent battery management system extends battery life
- Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V
- Includes 9 UPS supported outlets with 3 individually controllable load banks that can be powered off and back on again via software interface
- IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
- PowerAlert UPS monitoring and unattended shutdown software included
- Offers simultaneous monitoring by up to 4 directly-connected devices through included USB and DB9 interface ports, or the monitoring by any number of additional servers over IP with included PowerAlert monitoring software.
- Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
- Emergency Power Off(EPO) interface with cable
- Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for immediate reboot of connected devices
- Supports Tripp Lite’s WatchDog software application(requires optional WATCHDOGSW)
- Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
- Emergency Power Off(EPO) interface with cable
- Multi-function audible alarms and set of 5 front panel LEDs
- Network-grade AC surge suppression
- Attractive gray color scheme
- Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment.
OUTPUT |
| Output Volt Amp Capacity (VA) | 2200 | | Output kVA Capacity (kVA) | 2.2 | | Output Watt Capacity (Watts) | 1600 | | Output kW Capacity (kW) | 1.6 | | Power Factor | 0.7 | | Nominal Output Voltage(s) Supported | 220V; 230V; 240V | | Nominal Voltage Details | 230v inverter nominal output voltage | | Frequency Compatibility | 50 / 60 Hz | | Output Voltage Regulation (Line Mode) | -19% +8% | | Output Voltage Regulation (Battery Mode) | +/- 5% | | Output Receptacles | (8) C13; (1) C19 | | Included Output Power Cables | Includes 3 C13 to C14 output power cables | | Load Management Receptacles | Three switchable two-outlet C13 load banks | | Output Circuit Breakers | 10A (x2) – each breaker protects 4 C13 outlets each, C19 is unbreakered | | Hot-Swap PDU options | PDUBHV20 (2U / 6 C13, 2 C19 outlets) | | Output AC Waveform (AC Mode) | Sine wave | | Output AC Waveform (Battery Mode) | PWM sine wave |
|
INPUT |
| Rated input current (Maximum Load) | 11.3A | | Nominal Input Voltage(s) Supported | 230V AC | | UPS Input Connection Type | C20 inlet | | UPS Input Connection Description | IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles | | Input Phase | Single-Phase |
|
BATTERY |
| Full Load Runtime (min.) | 7 min. (1600w) | | Half Load Runtime (min.) | 19 min. (800w) | | DC System Voltage (VDC) | 48 | | Battery Recharge Rate (Included Batteries) | Less than 4 hours from 10% to 90% (typical, full load discharge) | | Internal UPS Replacement Battery Cartridge | RBC54 | | Battery Access | Provides the battery access door | | Battery Replacement Description | Hot-swappable, user replaceable batteries | | Expandable Runtime | No |
|
VOLTAGE REGULATION |
| Voltage Regulation Description | Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151V to 282V | | Overvoltage Correction | Input voltages between 245 and 282 are reduced by 12% | | Undervoltage Correction | Input voltages between 177 and 199 are boosted by 14% | | Severe Undervoltage Correction | Input voltages between 151 and 176 are boosted by 30% |
|
USER INTERFACE, ALERTS & CONTROLS |
| Switches | 2 Switches control off/on power status and alarm-cancel/self-test operation | | Alarm Cancel Operation | Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status | | Audible Alarm | Audible alarm indicates power-failure, overload and low-battery conditions | | LED Indicators | 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
|
SURGE / NOISE SUPPRESSION |
| UPS AC Suppression Joule Rating | 480 | | UPS AC Suppression Response Time | Instantaneous | | EMI / RFI AC Noise Suppression | Yes |
|
PHYSICAL |
| Primary Form Factor | Tower | | UPS Power Module Dimensions (hwd, cm) | 36.2 x 23.5 x 30.5 | | UPS Power Module Weight (kg) | 24.5 | | UPS Shipping Dimensions (hwd / cm) | 40.6 x 37.5 x 50.2 | | Shipping Weight (kg) | 27.5 | | Cooling Method | Fan | | UPS Housing Material | Polycarbonate |
|
ENVIRONMENTAL |
| Operating Temperature Range | +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | | Storage Temperature Range | +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | | Relative Humidity | 0 to 95%, non-condensing | | AC Mode BTU / Hr. (Full Load) | 347.2 | | Battery Mode BTU / Hr. (Full Load) | 812.9 | | AC Mode Efficiency Rating (100% Load) | 94% | | Audible Noise | Audible Noise < 47dBA At Front Side 1 Meter |
|
COMMUNICATIONS |
| Communications Interface | USB; DB9 Serial; Contact closure | | Network Monitoring Port Description | Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact closure port (4 total) | | PowerAlert Software | Included | | Communications Cable | 2 USB and 2 DB9 cables included | | WatchDog Compatibility | Supports Watchdog application, OS and hard-reboot restart options for remote applications |
|
LINE / BATTERY TRANSFER |
| Transfer Time | 2-4 milliseconds | | Low Voltage Transfer to Battery Power (Setpoint) | 151 | | High Voltage Transfer to Battery Power (Setpoint) | 282 |
|
SPECIAL FEATURES |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported | | High Availability UPS Features | Hot swappable batteries | | Green Energy-Saving Features | Individually controllable load banks |
|
CERTIFICATIONS |
| UPS Certifications | CE; Meets FCC Part 15 Category A (EMI) | | UPS Certification Details | CE 62040 |
|
WARRANTY |
| Product Warranty Period (International) | 2-year limited warranty | | Product Warranty Period (Mexico) | 2-year limited warranty | | Product Warranty Period (Puerto Rico) | 2-year limited warranty |
|
