Online IT store
beronet-pri1-gateway-all-ip-ready
beronet-pri1-gateway-all-ip-ready

beroNet 1 PRI VoIP Gateway

Product Description

The beroNet 1 PRI VoIP Gateway (BF4001E1Box, BF16001E1Box, BF4001T1Box, BF16001T1Box) contains one PRI (S2M, E1 or T1) port. The port can be operated individually in NT (Network Termination) or TE (Terminal Equipment) mode.  A fax server can be also connected by adding a virtual CAPI. The Gateway is compatible with SIP. A connection to common PBX Systems is possible via the ISDN interface.

beroNet VoIP Gateway Advantages

Save

Advantages

» Connects SIP with ISDN
» ISDN port can be switched in TE or NT mode
» Expandable with a supplementary module (PRI, BRI, FXO, FXS, GSM)
» Cloud managed
» Cascadable using PCM
» High quality Aluminium Housing
» Virtual CAPI available

Specifications

» 1 PRI (S2M, E1) ISDN Port
» The Port is configurable in NT or TE Mode
» Termination resistors (100 Ohm) per line configurable
» Layer 2 is Q.921 and Layer 3 is Q.931 (EuroISDN DSS1) compatible
» DSS1 Feature Set: CLIP/No-Screening, CLIR, COLP, UUS, MCID, CD, CNIP AOC-D
» Q.SIG Feature Set: CNIP
» Optional CAPI 2.0 available (Fax, voice)
» Codecs: G.723.1 and Annex A, G.729 a/b, G.726, (up to 16 channels)
» G.711 u/a (up to 64 channels), including echo cancellation
» G.168/G.165 echo cancellation with echo path change detection, up to 128ms
» Voice activity detection / comfort noise generation
» DTMF digit detection and generation
» T.38 Fax Relay (V.27, V.29 and V.17) (up to 16 channels)
» SIP user agent IETF RFC3261 compatible
» SIP via UDP/TCP with optional TSL support, SRTP
» “TDM Bridging” of two beroNet devices via PCM Bus
» Power supply: 110-230V, operating 12V DC at 2A
» Compliance: CE (EN55022, EN55024, EN60950)

Datasheet

idat_beronet-4fxs-gateway-en_Seite_1

Save

Possible scenarios

beronet-szenario-sip-trunk-gateway

SIP Trunk Gateway:

» Compatible with all PBX Systems
» Usable for almost any VoIP Provider
» Costsaving due to further use of the proprietary PBX

Save

%d bloggers like this: