“ipo ip500 v2 sys sd card al” has been added to your basket.
View basketDescription
SUINT2000XL Suppliers in Dubai
We give the best SUINT2000XL price in Dubai. More than this we are the top SUINT2000XL suppliers in Dubai. In addition to this we give the best tripp lite product support services in Dubai. More than this we are the top tripp lite dealers and distributors in Dubai.
- True on-line, double conversion UPS provides pure sine wave AC output at all times
- Maintains continuous operation with zero transfer time through blackouts, voltage fluctuations and surges
- Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
- Corrects brownout and overvoltages from 175-280V at full load. Input voltage range extends to 80-280V at 50% load or less
- 2000VA/1400W power capacity with 8 C13 outlets
- IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
- Standard internal battery set provides 14 min. runtime at half load and 5 min. runtime at full load
- Intelligent battery management system extends battery life
- Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
- Expandable runtime with optional external battery packs
- DB9 serial port for network interface; SNMP compatible
- Slot for optional SNMP/web card(part# SNMPWEBCARD)
- PowerAlert unattended shutdown software and network cable included
- Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
- Diagnostic LEDs
- Optional PDUBHV20 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment
- 3 C13-to-C14 power cables included.
OUTPUT |
| Output Volt Amp Capacity (VA) | 2000 | | Output kVA Capacity (kVA) | 2 | | Output Watt Capacity (Watts) | 1400 | | Output kW Capacity (kW) | 1.4 | | Power Factor | 0.7 | | Crest Factor | 3:1 | | Nominal Output Voltage(s) Supported | 220V; 230V; 240V | | Nominal Voltage Details | 230V default | | Frequency Compatibility | 50 / 60 Hz | | Frequency Compatibility Details | Output frequency matches input nominal on startup, defaults to 50 Hz on cold-start | | Output Voltage Regulation (Line Mode) | +/- 2% | | Output Voltage Regulation (Economy Line Mode) | +/- 10% | | Output Voltage Regulation (Battery Mode) | +/- 2% | | Output Receptacles | (8) C13 | | Included Output Power Cables | Includes 3 C13 to C14 output power cables | | Hot-Swap PDU options | PDUBHV20 (2U / 6 C13, 2 C19 outlets) | | Output AC Waveform (AC Mode) | Sine wave | | Output AC Waveform (Battery Mode) | Pure Sine wave |
|
INPUT |
| Rated input current (Maximum Load) | 7.4A (220V), 7.1A (230V), 6.8 (240V) | | Nominal Input Voltage(s) Supported | 220V AC; 230V AC; 240V AC | | UPS Input Connection Type | C20 inlet | | UPS Input Connection Description | IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles | | Input Circuit Breakers | 20A | | Input Phase | Single-Phase |
|
BATTERY |
| Full Load Runtime (min.) | 5 min. (1400w) | | Half Load Runtime (min.) | 14 min. (700w) | | Expandable Battery Runtime | Extended runtime supported via optional external battery packs | | External Battery Pack Compatibility | BP72V15-2U(limit 1); BP72V28RT-3U(multi-pack compatible) | | DC System Voltage (VDC) | 72 | | Battery Recharge Rate (Included Batteries) | Less than 4 hours from 10% to 90% (typical, full load discharge) | | Battery Replacement Description | Hot-swappable, user replaceable batteries | | Expandable Runtime | Yes |
|
VOLTAGE REGULATION |
| Voltage Regulation Description | Online, double-conversion power conditioning | | Overvoltage Correction | 2% output voltage regulation during overvoltages to 280 | | Undervoltage Correction | 2% output voltage regulation during undervoltages to 175 | | Severe Undervoltage Correction | 2% output voltage regulation during undervoltages to 80 (under 50% load only) |
|
USER INTERFACE, ALERTS & CONTROLS |
| Switches | 2 Switches control off/on power status and alarm-cancel/self-test operation | | Alarm Cancel Operation | Power-fail alarm can be silenced using alarm-cancel switch | | Audible Alarm | Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions | | LED Indicators | 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery and fault status information – includes 4-LED meter display for load and battery charge level |
|
SURGE / NOISE SUPPRESSION |
| UPS AC Suppression Joule Rating | 570 | | UPS AC Suppression Response Time | Instantaneous | | EMI / RFI AC Noise Suppression | Yes |
|
PHYSICAL |
| Primary Form Factor | Tower | | UPS Power Module Dimensions (hwd, cm) | 37.3 x 14 x 42.4 | | UPS Power Module Weight (kg) | 30.5 | | UPS Shipping Dimensions (hwd / cm) | 49.3 x 24.9 x 60.5 | | Shipping Weight (kg) | 33.5 | | Cooling Method | Fan | | UPS Housing Material | Steel |
|
ENVIRONMENTAL |
| Operating Temperature Range | +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius | | Storage Temperature Range | +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius | | Relative Humidity | 0 to 95%, non-condensing | | AC Mode BTU / Hr. (Full Load) | 528.9 | | AC Economy Mode BTU / Hr. (Full Load) | 303.8 | | Battery Mode BTU / Hr. (Full Load) | 774.9 | | AC Mode Efficiency Rating (100% Load) | 90% | | AC Economy Mode Efficiency Rating (100% Load) | 94% | | Audible Noise | < 45 dB at front side 1m |
|
COMMUNICATIONS |
| Communications Interface | DB9 Serial; Slot for SNMP/Web interface | | Network Monitoring Port Description | Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 communications | | PowerAlert Software | Included | | Communications Cable | DB9 cabling included |
|
LINE / BATTERY TRANSFER |
| Transfer Time | No transfer time (0 ms.) in online, double-conversion mode | | Low Voltage Transfer to Battery Power (Setpoint) | 175V (100% load), 80V ( <50% load) | | High Voltage Transfer to Battery Power (Setpoint) | 280 |
|
SPECIAL FEATURES |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported | | High Availability UPS Features | Automatic inverter bypass |
|
CERTIFICATIONS |
| UPS Certifications | CE | | UPS Certification Details | CE EN62040-1-1, EN62040-2 Class A |
|
WARRANTY |
| Product Warranty Period (Worldwide) | 2-year limited warranty |
|
